- 25 Year Panel Warranty
- 100+ 5★ Reviews
- Nationwide Installation
- Sell Back To The Grid
“Fulham’s Future is Green – Samso Energy”
We’ve been installing heat pumps across the UK since 2018, with over 2,500 happy customers and a 98% satisfaction rating. Our mission is simple: we provide reliable, efficient, and affordable heating solutions that are better for the planet.
Our team covers the whole country through local service centers, so you’ll always get quick support from engineers who know your area. All our installers are fully qualified and trained by the top heat pump brands like Mitsubishi, Daikin, and Vaillant.
We’re here for the long haul – from your first consultation right through to ongoing maintenance, we make sure your system runs perfectly and you’re completely happy.
Earlier air source heat pump models used R410A refrigerant and single-stage compressors. These systems lost 40% of their heating capacity when outdoor temperatures dropped to 2°C. They operated in simple on/off cycles that caused frequent temperature fluctuations.
Current air source heat pump systems employ R32 refrigerant with variable-speed inverter compressors and scroll technology. Scroll compressors compress refrigerant in spiral chambers for smoother operation. They maintain 85% capacity even at -7°C and modulate output continuously for stable indoor temperatures.
Modern heat pump SCOP ratings reach 4.2-4.8 in UK climate conditions. SCOP means Seasonal Coefficient of Performance – it measures yearly efficiency, including defrost cycles. Previous generation units achieved just 2.8-3.2 SCOP ratings. This 50% improvement translates to annual savings of £400-600 for typical Fulham properties with 120m² floor area.
Enhanced vapor injection technology allows today’s systems to extract heat from air temperatures down to -20°C. Vapor injection adds extra refrigerant into the compression cycle for better cold-weather performance. Advanced control algorithms predict weather patterns and pre-heat thermal mass during off-peak electricity periods, maintaining consistent comfort throughout London’s winter months.
Current systems integrate with MCS-certified monitoring platforms and smart home ecosystems, including Nest, Hive, and Honeywell. Machine learning algorithms analyze occupancy patterns and weather forecasts to optimise heating schedules automatically. Some models include backup immersion heaters rated at 3-6kW for extreme weather events, though these activate less than 5% of the time in London’s climate.
The £7,500 Boiler Upgrade Scheme grant applies to MCS-certified installations with SCOP ratings above 2.8. MCS certification ensures systems meet British standards for performance and installation quality. Hammersmith & Fulham Council offers additional £500 grants for properties in Conservation Areas that require special planning considerations. Combined incentives can cover 45-60% of total installation expenses for most residential projects.
Get your personalised quote today and take the first step towards a brighter, greener future!
Our installation process is designed to make everything as smooth as possible for you. We follow proven industry standards to ensure your heat pump works perfectly from day one and keeps running efficiently for years to come.
In the first step, engineers determine exact heating requirements for each room based on construction materials, window types, and insulation levels. We assess electrical supply capacity, outdoor unit placement options, and identify any necessary planning permission requirements for Conservation Area properties in central Fulham.
Next, our specialists recommend specific equipment based on calculated heat loads and property characteristics. We explain SCOP ratings, noise levels (typically 42-48 dB at 1 meter), and integration options with existing radiator systems.
Our installers come with all the right qualifications – they’re Gas Safe registered, NICEIC electrical certified, and trained by the heat pump manufacturers themselves. We handle everything from the refrigerant work to the electrical connections (your heat pump will need a dedicated circuit), and we make sure everything’s set up exactly how the manufacturer intended.
Once we’re done, you can start enjoying those lower heating bills – most of our customers see their costs drop by 35-50% compared to their old gas boiler. We’ll show you how to use your new system, help you understand the best settings for different seasons, and get you set up with any monitoring apps.
Heat pumps are brilliant for cutting your carbon footprint – they can reduce your home’s emissions by around 2-3 tonnes every year compared to gas heating. Plus, as the UK grid gets cleaner with more renewable energy, your heat pump becomes even greener over time.
Heat pumps are incredibly efficient – they can be 3-4 times more efficient than electric heaters and much better than gas boilers too. That means you use way less energy to heat your home the same amount.
Switching from gas heating can cut your annual carbon footprint by over 2 tonnes. And it’s only getting better – the government expects our electricity to be much cleaner by 2030 as we add more wind farms.
A good heat pump will keep you warm for 18-22 years with proper care, while gas boilers usually need replacing after 12-15 years. They’re built to last with fewer moving parts and solid warranties.
Most of our customers save hundreds every year on their heating bills. You can save even more with smart electricity tariffs that give you cheaper rates at night – perfect for heat pumps.
At Samso Energy, we’re committed to providing you with heat pump solutions that are as reliable as they are affordable. Here’s why you should choose us:
Proper sizing prevents short-cycling and ensures maximum comfort with minimal energy consumption. Our air source heat pump installations consistently achieve 430% seasonal efficiency through precision sizing and optimal equipment selection.
Selected cold-climate heat pumps maintain full capacity to -10°C and 70% capacity to -20°C using enhanced vapor injection and variable-speed scroll compressors. Intelligent defrost controls minimize ice buildup while maintaining continuous heating.
Our installation packages include weather compensation controls, zone-based heating management, and smartphone connectivity through dedicated apps. Smart thermostat integration allows remote monitoring and scheduling from anywhere.
Your heat pump comes with solid warranty protection. If you want extra peace of mind, we offer extended service plans that include annual check-ups, priority repairs, and replacement cover. Our local network means we can get parts quickly and have certified engineers to you fast anywhere in Greater London.
Getting a heat pump helps Fulham hit its 2030 carbon-neutral goal, and it’s great for your wallet too. Homes with heat pumps often see their value go up by 3-5% thanks to better energy ratings and future-proofing against new heating rules. With current government incentives, most homeowners get their money back within 6-8 years.
A heat pump is basically a clever heating and cooling system that takes warmth from the outside air and brings it into your home – a bit like a fridge working in reverse. You’ll have an outdoor unit and an indoor unit connected by insulated pipes. The brilliant thing is they can pull heat from the air even when it’s freezing outside, down to about -15°C.
Absolutely! Heat pumps work really well with most existing central heating systems in Fulham homes. They’ll connect to your current radiators and hot water cylinder using the same pipes your old boiler used. The main thing to know is that heat pumps run at slightly lower temperatures than gas boilers, so you might need to upgrade some radiators to bigger ones to get the best performance.
Most installations take 2-3 days for a typical home. On day one, we’ll position the outdoor unit, sort the electrical connections, and start the pipework. Day two is for the indoor bits, getting everything running, and testing it all works perfectly. If your home needs electrical upgrades or more complex pipework, it might stretch to 3-4 days.
They work brilliantly here! Modern heat pumps are designed specifically for UK weather, and London’s winter temperatures (usually between 2-7°C) are perfect for them. Even when it gets properly cold – down to -7°C – they still run very efficiently. Government testing shows they typically produce 2.5-3.5 times more heat than the electricity they use.
It depends on your specific home, but we work this out using a detailed heat loss calculation that looks at your floor area, ceiling height, insulation, and windows. Most Fulham terraced houses need an 8-12kW heat pump, while bigger Victorian properties usually need 12-16kW systems.
Kopshop, 6 Old London Road
Kingston upon Thames
KT2 6QF
© Samso Energy. All Rights Reserved 2025 . Powered By Lunar Excel
